I currently have a bunch of Sonos speakers connected to a Unifi network. All of my speakers except one work completely fine, but this one specific One drops offline nightly and requires manually unplugging it. Any suggestions?
Hello!There is a new Sonos Port in our office. The Sonos Port is located in the server cabinet, connected via an ethernet wire to the nearest switch. The network is new and the Internet is about 200 Mbps. There is only one subnet. There are no conflicts on the network. The network engineer confirmed it. I noticed a problem connecting to the Sonos Port with the new S2 version (updated). The updated Sonos Port (with S2) is not detected on the network. I tried to connect from my smartphone (Sonos S2 App), and also tried to find it from my computer (with Sonos S2). A long search for the device, eventually not to be found. Then I made a rollback (Downgrade) to the S1 version. After the rollback, the Sonos Port began to be detected normally on the network. In the previous version, an update message is intrusively coming out. Dear developers, please check this situation, it is necessary to fix the bug and optimize the new version of S2 for Port. Thank you!P.S. Please move the topic to Audio C
Sorry another Atmos plea for help.As per the title I have a Apple TV 4k (2nd gen), Arc (purchased 2021) and Samsung QE50Q60TAU, I’ve had this setup in place since the release of that Apple TV version. I’ve never had a problem with atmos when streaming, but in the last week or so, when I stream a show that has atmos audio I just get silence until I powercycle the TV and then the Arc picks up the format and I can watch the show. Swapping audio format (by going to the main menu) causes the problem with Atmos to happen again.So far I’ve tried:Turning everything off for 5 mins Updating TV firmware Unplugging the Arc HDMI and plugging it back in Perfoming a factory reset on the ArcI can confirm:The soundbar is plugged into the eArc port on the TV I’m using the HDMI cable supplied by Sonos Apple TV has Atmos enabled in settings Samsung is set to use eArc as the output format Samsung TV has Atmos enabled in settingsI’m out of ideas, can anyone recommend anything else I can try!?
Enabling night sound with beam gen 2, 2 fives, sub mini causes a delayed distorted repeat of what the center channel is doing. Maybe it’s just me but I think if other people try it you’ll hear it too. It doesn’t happen when it’s turned off obviously and the surround settings is 0 for music and tv.
I just got my 2nd Sub for my living room in addition to a pair of Era 300s to connect to my existing Arc, sub and Play 5 gen 2 set up for my living room - trouble is, the new sub and era 300s won’t connect to my existing wifi network which my other speakers are on. They play just fine as well. Thanks
I’ve been using Beam gen 1 with my Samsung Frame TV. No problems. HDMI and all other cables are in the wall. I’m now replacing with a Beam gen 2 (so that I can use new Eras 300 set as surround). Is there any reason the HDMI cable that I’ve been using successfully with Beam gen 1 would not work with the Beam 2? When I connect the new Beam 2 using the existing cable, nothing works. So I tried the HDMI cable that came with Beam 2, it works, but it will be too short to run behind with wall.Why would the HDMI cable work for Beam 1 and not Beam 2? And if I need to buy a new cable, (that’s long enough), do I just need to get HDMI 2.1 for it to work?Thanks in advance!k
Long time Sonos user, Play 1’s, Play 5’s. Many years ago had issues, got them sorted out, stayed on S1 when S2 was released. Today when I opened the iOS app, got a “your system hasn’t been updated in 1 year, Sonos will not work until you update the app/system”. The system has been working fine largely because I haven’t installed any updates. Didn’t see anything in the forums, call Sonos Support & was “disconnected” when he was supposedly researching my question. How do I continue to use my Sonos system and the iOS app without being forced to install any updates ? Thanks
I’ve had my Sonos system working ok until recently. Underwent an ISP change that threw some things for a loop.Where I’m at now is….I have an Apple Music Subscription. What I’d like to be able to do is download one of my Favorites playlist to the local hard drive. Then, add that folder or playlist to My Library in Sonos so I don’t have to rely on streaming as much but rather play these local files that Apple lets me use for offline use. Is this possible with Sonos/Apple? I’ve been trying my best to add it and it does not work. It will however recognize files I uploaded to Apple Music (so I guess they look at them as mine), but I can’t get the other local downloaded files to appear. Any way to do what I’m thinking? Thank you!
I cannot access my Itunes Music or Playlists. I get the following error message "Unable to play song-cannot connect to my laptop/music because the server cannot be found." I can play all Sonos Radio channels without an issue. I am up to date with updates.
I have a new Sony A95L QD-OLED and have connected my arc, sub and 2 1’s. I use the app and I can only get Dolby multichannel PCM 2.0. I had an older Sony and could away get Dolby 5.1 with the same set up. What am I doing wrong? Thanks,
I am using the S1 app for my Sonos speakers. Recently my voice enabled Sonos speakers are not working with Alexa. I can control my speakers in the S1 app but not with Alexa.When I look at the Alexa app the voice enabled Sonos speakers are showing offline.I have disabled and re-enabled Sonos Skill in Alexa Alexa does not find any devices when I re-enabled Sonos skill in the Alexa app I have removed and added Alexa voice enable to each speaker I have powered off and on the speakersDid something change?
I’ve just bought my first Sonos product - Era 100 - and it sounds great.I’m using the Sonos voice control to play radio stations. ie. “Hey Sonos - play BBC radio 6”.All works fine but the voice feedback - “Awesome, “Great choice” etc is so irritating.I checked the app but couldn’t find a way to disable this. Am i missing something?
I have the sonos app downloaded on two iPhones and an iPad. Out of the blue one of the iPhones says it does not recognize an existing Sonos system, but the other iPhone and iPad work fine. Try to connect the iPhone and I can’t find anything, wants me to reset my router. this is absolutely stupid, because it worked literally two hours ago. What could go wrong? What kind of a glitch in the software creates this glitch, how ridiculous!!
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.